fbpx
0

MERCURY 1200VA ELITE PRO UPS

126,000.00

In stock

Category:

For a UPS that can be trusted for [ performance, reliability and durability, the Mercury UPS brand is one of the top choices. The Mercury Elite 1200 Pro Line Interactive UPS is suitable for office and domestic IT equipment and electronics.

The total output rating of the Mercury Elite 1200 is 720 watts. Check the full technical specifications, below.

Input voltage 220VAC
Input frequency 50Hz
Input phase Single phase
Input socket With Fuse
Cold Start (0 to 100% load) Press the ON/OFF switch
Input range (220V) 140-300
Rating output (VA). 1200VA
Rating output (W). 720W
Waveform Battery mode(simulated sine wave),AC mode(sine wave)
Power factor 0.6
Rating voltage 220V
Output range 220Vac-7% to +15% in battery mode
Rear Output Socket 4 x Universal – Battery backup
Transfer time TYPICAL4-8ms
Communication Interface optional RS232/RJ11
Rating frequency 50Hz
Line-mode Synchronize with the Utility
Battery mode 50 Hz±1Hz
Line Mode FUSE& firmware protection
Battery Mode Software protection controlled by firmware
Line Mode 110%±5%; Go to fault mode after 5 minutes, 120%±5%; Go to fault mode immediately.
Battery Mode 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately
Rating 2 X 12V/7.5AH (Actual rating 7AH)
Backup time – Typical 20 to 30 mins (depending on load)
Charge current About 1A at normal mode.
Over charge protection 29V±0.2V stop charging, 27.4+/-0.2V recharge
Weight 8.6+/-0.3 Kg
Dimensions per unit packaging 395x205x258mm
Packsize per Master carton 2
Dimensions per Master carton 410x430x273mm
Be the first to review “MERCURY 1200VA ELITE PRO UPS”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

See It Styled On Instagram

    No access token

Main Menu

0